Olympus OM-1 Instrucciones de operaciones descargar pdf (Pagina 8)

The OLYMPUS OM-1 is supplied with

a 1.35V mercury battery (JIS H-D type)

to power its through-the-lens exposure

metering system. It will last approxi-

mately one year depending upon use

and must be replaced with an Eveready

(UCAR) EPX625, Mallory PX625

or equivalent. Substitutes must not be

used. (NOTE; The exposure meter stops

functioning when the battery runs out.

To prolong battery life, make sure the

Meter Switch Lever is in the "OFF"

position when the camera is not in

use.) To insert the battery:

1) Insert the edge of a coin into the

cap of the battery chamber and turn

counter-clockwise until the cap has

been removed.

1. Open the camera back.

Pull up on the rewind knob. A slight

resistance may be felt before the

camera back snaps partially open.

2) Place the battery in the battery

chamber making sure the positive side

(+) is facing out. The exposure meter

does not function if the battery is

inserted incorrectly.

3) Replace the cap tightly.

2. Load the camera.

Insert a film cartridge in the film

chamber and push the rewind knob

back into its original position. It may

be necessary to turn the rewind knob

slightly before it will lock securely in

place.

INSERTING THE BATTERY

LOADING THE FILM

FRONT LENS CAP

7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 73 74

Comentarios a estos manuales

Sin comentarios